Warm Booting The Cn4; Cold Booting The Cn4 - Intermec CN4 User Manual

Chapter 4 — Troubleshooting and Maintaining the CN4

Warm Booting the CN4

Cold Booting the CN4

84
• Warm booting the CN4
• Cold booting the CN4
• Clean booting the CN4
You may need to perform a warm boot to correct conditions where an
application stops responding to the system.
To warm boot the computer
• Press and hold the Power button for 10 seconds.
Or,
Right-click on the CN4 via the SmartSystems Console and select
•
Intermec Power Tools > Warm Boot Device.
The computer systematically shuts down, restarts, and goes through
the initialization process.
In some cases where the computer completely stops responding, it
may be necessary to perform a cold boot. Because cold booting may
result in data loss, use this method only if all other recovery methods
have failed.
Note: Cold booting the CN4 does not guarantee that cached disk
data will be saved, so transactional data may be lost during the reset.
All other data is preserved.
To cold boot your CN4
1 Press the Power button to suspend the CN4.
2 Remove the battery pack from the CN4.
3 Press the Reset button on the back of the CN4.
CN4 Series Mobile Computer User's Manual