Adjusting The Volume Of The Rear Speaker - Intermec CN4 User Manual

Adjusting the Volume of the Rear Speaker

CN4 Series Mobile Computer User's Manual
You can adjust the computer volume for your needs and your
environment. The volume includes sounds you hear when you tap the
screen or scan bar codes with a scanner. You can set the volume to off,
very low, low, medium (default), high, and very high. Use the
following table to understand the different ways to adjust the volume.
Volume up/down
Location of the Rear Speaker and Volume Control
Changing the Volume of the Rear Speaker
Way to Adjust Volume
Tap the Volume (
the navigation bar.
Use Intermec Settings.
Press the side volume control. Press the top of the side volume control to
Rear speaker
Procedure
) icon in Use the stylus to move the volume slider up
or down for the computer. You can also turn
the volume on or off and choose to use
Vibrate mode.
From the Start menu, choose Settings > the
System tab > Intermec Settings. Go to
Device Settings > Beeper > Volume. Select
the setting you prefer and save your changes
before exiting. For help, see
Intermec Settings Directly On the CN4"
on page 36.
turn the volume up. Press the bottom of the
side volume control to turn the volume
down.
Chapter 1 — Using the CN4
"Using
19