Using The Imager - Intermec CN4 User Manual

Using the Imager

CN4 Series Mobile Computer User's Manual
Understanding the LEDs (continued)
LED Color
Blinking
blue
Off
Note: The blue light may stay on for up to 30 seconds, but will usually
turn off after less than 10 seconds. During this time, do not toggle the
CN4 on or off and do not remove the battery, or you may corrupt the
CN4. If the computer seems to behave erratically, first try warm
booting and then cold booting the CN4 as described in
the CN4" on page 83.
The Ready-to-Work indicator (blue light) is for the SmartSystems
Foundation application that is part of a wireless network using all
Intermec devices. For more information, see
Settings Remotely With SmartSystems Foundation" on page 35.
Selected application software programs may also use the indicator for
other purposes.
For more information on SmartSystems Foundation, visit
www.intermec.com
Software > Management > SmartSystems Foundation.
The area imager in the CN4 can perform multiple tasks:
• Reading bar codes, including 1D, 2D, and composite symbologies
and postal codes. For more information, see the next section,
"Reading Bar Codes."
• Capturing images. Use the imager like a digital camera to take
high-quality, greyscale pictures. For more information, see
"Capturing Images" on page 29.
• Document imaging of full business forms such as bills of lading or
invoices. For more information, see
page 31.
Description
You have successfully loaded and activated
Intermec Terminal Emulator (ITE).
ITE is loaded, but is inactive.
ITE is missing or disabled.
and choose Products > Applications and
"Capturing Documents" on
Chapter 1 — Using the CN4
"Resetting
"Using Intermec
25