Installing A Minisd Or Sim Card - Intermec CN4 User Manual

Chapter 1 — Using the CN4

Installing a miniSD or SIM Card

36
3 Using the screen display as a viewfinder, move the camera until
you have the image you want to capture.
4 Press Enter to save the image. If you select to save your pictures to
main memory, they are saved to permanent storage on the CN4.
To save picture files
1 Tap Menu (lower right) then Options to access the Camera tab.
2 Select where you want to save files to, type a filename prefix, and
select a compression level.
3 Tap ok.
You can corrupt your miniSD card if you do not follow these
installation and removal procedures exactly. Before installing a
miniSD card, inspect the gasket in the compartment for any
damage or wear, and contact your Intermec representative if you
find any damage or wear.
The miniSD card and SIM card slots are located below a door inside
the CN4 battery compartment.
Once the door to the miniSD is opened and closed (for changing,
installing, or removing the SIM or miniSD card), the CN4 performs a
cold boot. For more information, see
page 84.
"Cold Booting the CN4" on
CN4 Series Mobile Computer User's Manual