Select Lever Control Cable And Shift Rod Adjustment - Yamaha YFM400FWA 2000 5GH3-AE1 Service Manual

SELECT LEVER CONTROL CABLE AND
SHIFT ROD ADJUSTMENT
SELECT LEVER CONTROL CABLE AND
SHIFT ROD ADJUSTMENT
1 NEUTRAL
2 HIGH
3 LOW
4 REVERSE
5 PARK
6 Control cable
7 Select lever shift rod
WARNING
Before moving the select lever, bring the
machine to a complete stop and return the
throttle lever to its closed position. Other-
wise the transmission may be damaged.
1.Adjust:
Rear brake pedal free play
Refer to "REAR BRAKE LEVER AND
PEDAL ADJUSTMENT".
2.Adjust:
Select lever control cable
Select lever shift rod
*********************************
Select lever control cable and select lever
shift rod adjustment steps:
Control cable:
Make sure the select lever is in NEUTRAL.
Adjust the control cable so there is zero
free play in the cable. When the adjust-
ment is correct, slack in the return spring
1 will be taken up.
NOTE:
In some cases it will be necessary to further
adjust the cable with the locknuts 2
arrangement that holds the cable to its
mount.
When the brake begins to work "a = 20 ~
30 mm (0.8 ~ 1.2 in)", verify that the select
lever can be shifted to REVERSE from
NEUTRAL, to PARK from REVERSE and to
NEUTRAL from REVERSE.
Before the brake begins to work "a = 0 ~
20 mm (0 ~ 0.8 in)", verify that the select
lever cannot be shifted to REVERSE from
NEUTRAL, to REVERSE from PARK and to
NEUTRAL from REVERSE.
3 - 42
INSP
ADJ