Twisted Hobbys CRACK PITTS Assembly Manual page 35

Repeat the process for the other three
side force generators. Make sure they
are square to the wing and parallel to
the direction of ight.
This completes the build of the airframe with the included kit items. There is
an optional Landing Gear set, the directions of which can be found near the end
Please visit www.TwistedHobbys.com for other accessories and aircraft.
There are several online resources and forums for this model as well. It is
suggested that you visit the RC Groups Thread for this model for additional
information, it is a great resource for questions and insight to this aircraft.
Rev: 2015.09.18.v01a
Picture above shows how the small
surface of the SFG's is installed
towards the insides of the wings.
of this manual.
Finish up the program in your radio, ie,
set the subtrims so all surfaces are
neutral. Set the Servo End Points, Dual
Rats and Expo to suit. See the Control
Throws Section for guidelines.
page 35