Twisted Hobbys CRACK PITTS Assembly Manual page 30

Repeat the process with the other side. Locate the tail servo arms and
Attach the adjustable links as pictured
adjustable link pieces.
above. Notice the orientation of the
links and keepers. This is important,
make sure it is right, these can not be
dis-assembled.
Repeat with the elevator servo. Again, Locate the push rod guide tree and snip
Starting with the rudder servo, make
sure it is centered and attach the horn make sure the servo is electronically all the parts free.
as near perpendicular as possible. centered. Install the servo horn screw.
Install the servo horn screw.
page 30
Rev: 2015.09.18.v01a