Twisted Hobbys CRACK PITTS Assembly Manual page 26

Once the wings and struts have dried Apply a medium skim coat to the
Bring the two parts together. Take care
the tail and canopy can be attached. rudder and mating surface of the stab,
to get the alignment of the two pieces
Tack up method will be used for both. and let dry for approx 10 minutes.
just right. The bond will be instant and
there will be no opportunity for
adjustment.
Repeat the process for the Canopy. A Bring the two pieces together, and
Press the two pieces rmly together to
ensure a good bond for the length of the medium skim coat on both mating again use care to get the proper
joint. surfaces. Let tack up for approx 10 alignment as the two pieces come into
minutes. contact with one another.
page 26
Rev: 2015.09.18.v01a