Advertisement
Squeeze some Welders into the slot.
Put a medium skim coat on both sides
Install the horn into the wing. Note that
of the horn in the area that gets buried
the main part of the adjustable link
into the wing.
should be facing outward
Wipe away any extra glue.
Repeat with the other side. Again notice
Flip the wing over and check to see that
the prole of the horn matches the
the orientation of the adjustable links.
prole of the hinge cut out. This
indicates that the horn is in the proper
position.
page 20
Rev: 2015.09.18.v01a
Advertisement
Need help?
Do you have a question about the CRACK PITTS and is the answer not in the manual?
Questions and answers