STMicroelectronics STM32F042F4 Manual page 116

Revision history
Date
16-Dec-2015
10-Jan-2017
116/117
Table 76. Document revision history (continued)
Revision
Section 3: Functional
–
Figure 2: Clock tree
Section 4: Pinouts and pin
– Package pinout figures updated (look and feel)
–
Figure 5: WLCSP36 package
–
Table 13: STM32F042x pin definitions
and USART4_CTS removed
–
Table 15: Alternate functions selected through GPIOB_AFR
registers for port B
I2C1_SDA and I2C1_SCL
4
Section 5: Memory
–
Table 17: STM32F042x4/x6 peripheral register boundary addresses
- change of "SYSCFG + COMP" to "SYSCFG"
Section 6: Electrical
–
Table 50: I/O static
–
Section 6.3.16: 12-bit ADC characteristics
sentence
Section 7: Package
–
Figure 49: Recommended footprint for UFQFPN28 package
distance between corner pads added
Section 6: Electrical
–
Table 37: LSE oscillator characteristics (fLSE = 32.768 kHz)
information on configuring different drive capabilities removed. See
the corresponding reference manual.
–
Table 25: Embedded internal reference voltage
5
–
Figure 28: SPI timing diagram - slave mode and CPHA = 0
Figure 29: SPI timing diagram - slave mode and CPHA = 1
enhanced and corrected
Section 8: Ordering
– The name of the section changed from the previous "Part
numbering"
DocID025832 Rev 5
STM32F042x4 STM32F042x6
Changes
overview:
modified
descriptions:
pinout- now presented in top view
- note 3 added; CIMP1_OUT
- change of I2C2_SDA and I2C2_SCL to
mapping:
characteristics:
characteristics- removed note
information:
characteristics:
information:
- changed introductory
-
- V values
REFINT
and