When The [ I ] Indicator Blinks And [H] Is Displayed In The Numeric Display - Riso CV1200W User Manual

74
Chapter 9 Troubleshooting

When the [ I ] indicator blinks and [H] is displayed in the numeric display

In order to maintain the optimum printing conditions, this machine obtains information from the consumables.
If the information cannot be obtained, a code that starts with [H] is displayed in the numeric display.
Enter an appropriate value.
BWe assume no responsibility or liability for cases in which you use any consumables other than the con-
sumables recommended by RISO. We are also unable to provide appropriate values for setting. If appro-
priate values for setting are unknown, we recommend that you adjust by changing values from [1] and
on, while checking the print results at the same time.
BIf the following operations are performed, the values entered will be erased. In this case, it is necessary
to re-enter those values.
CThe power switch is turned off and then on again.
CThe [START] key is pressed while this machine is in sleep mode.
■ Ink Information Input
Set the items according to the following table.
Code Description of setting
H1 Ink Color Setting
Enter [1].
HE Ink Use By date setting (month)
Enter the month during which the warning [F51]
Pressing the [START] key goes to the next step.
HY Ink Use By date setting (year)
Enter the year during which the warning [F51]
Pressing the [START] key completes the entry of the ink information.
■ Master Information Input
Set the items according to the following table.
No. Description of setting
H4 Master-making Density Setting
Enter the setting value to obtain the appropriate master making density
according to the master.
Pressing the [START] key goes to the next step.
HE Master Use By date setting (month)
Enter the month during which the warning [F56]
Pressing the [START] key goes to the next step.
HY Master Use By date setting (year)
Enter the year during which the warning [F56]
Pressing the [START] key completes the entry of the master information.
(A 71) will be displayed.
(A 71) will be displayed.
(A 71) will be displayed.
(A 71) will be displayed.
Value
1 (Black)
01 to 12
(Enter two digits of month)
01 to 99
(Enter last two digits of
year)
Value
1 (Light) to 10 (Dark)
01 to 12
(Enter two digits of month)
01 to 99
(Enter last two digits of
year)