Call Hold/Resume - Yealink CP860 User Manual

User Guide for the CP860 HD IP Conference Phone
The call is muted automatically when set up successfully.
To un-mute the microphone while dialing:
Press
1.
You can also mute the microphone when the IP phone is ringing.
Note

Call Hold/Resume

You can place an active call on hold. Only one active call can be in progress at any time. Other
calls can be made and received while placing the original call on hold. When you place a call on
hold, your IP PBX may play music on hold to the other party while waiting.
To place a call on hold:
Press the Hold soft key during a call.
1.
LED indicators flash green. The LCD screen indicates that the call is on hold.
The phone will beep softly every 30 seconds to remind you that you still have a call on hold.
Note
To resume a held call:
Press the Resume soft key.
1.
Multiple Calls on Hold:
If multiple calls are placed on hold:
Press or
1.
retrieve the desired call.
If more than one call is placed on hold, a numbered prompt appears on the LCD screen, for
example "2/3", indicating that this is the second call out of three calls.
80
again on the pre-dialing or dialing screen.
to switch between the calls, and then press the Resume soft key to