Sending Rtp Stream - Yealink CP860 User Manual

Yealink IP phone supports the following 31 channels:
0: You can broadcast audio to channel 0. Note that the Yealink IP phones running old

firmware version (old paging mechanism) can be regarded as listening to channel 0. It is
the default channel.
1 to 25: You can broadcast audio to a specific channel. We recommend that you specify

these channels when broadcasting with Polycom IP phones which have 25 channels you
can listen to.
26 to 30: You can broadcast audio to a specific channel. We recommend that you specify

these channels when broadcasting with Yealink IP phones running new firmware version
(new paging mechanism).
The IP phones will automatically ignore all incoming multicast paging calls on the different
channel.

Sending RTP Stream

To configure a multicast paging key via web user interface:
Click on Dsskey->Programable Key.
1.
Select the desired programable key.
2.
Select Paging from the pull-down list of Type.
3.
Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Value field.
4.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
Enter the desired channel in the Extension field.
5.
The valid channel ranges from 0 to 30.
Click Confirm to accept the change.
6.
To configure a paging list key via web user interface:
Click on Dsskey->Programable Key.
1.
Select the desired programable key.
2.
Using Your Phone with SIP/Cloud Account
107