Yealink CP860 User Manual page 96

User Guide for the CP860 HD IP Conference Phone
to in the Forward to field.
Press the
3)
the After Ring Time field.
The default ring time is 12 seconds.
(Optional.) Enter the no answer forward on code or off code respectively in the
4)
On Code or Off Code field.
Press the Save soft key to accept the change or the Back soft key to cancel.
4.
The icon
Call forward is configurable via web user interface at the path Features->Forward&DND.
You can also enter the SIP URL or IP address in the Forward to field. For more information on
Note
using the SIP URL or IP address, refer to
Call forward is local to the phone, and may be overridden by the server settings. Call forward on
code or off code may be different between servers. For more information, contact your system
administrator.
To configure the forward authorized numbers via web user interface:
Click on Features->Forward&DND.
1.
Select Enabled from the pull-down list of Forward Emergency.
2.
Enter the numbers in the Forward Authorized Numbers field.
3.
For multiple numbers, enter a comma between every two numbers.
Click Confirm to accept the change.
4.
When call forward is activated on the phone, the phone cannot forward incoming calls
from the numbers specified in the Forward Authorized Numbers field.
Forward authorized number is configurable via web user interface only.
Note
84
or soft key to select the ring time to wait before forwarding from
on the idle screen indicates that the call forward is activated.
Placing Calls on page 72.