Yealink CP860 User Manual page 121

Repeat steps 2 to 7, you can add more paging groups.
8.
Paging list is configurable via web user interface at the path: Directory->Multicast IP.
To delete a paging group via phone user interface:
1. Press the paging list key when the phone is idle.
2. Press
3. Press the Option soft key, and then select Delete soft key.
The LCD screen prompts "Delete selected paging group?".
4. Press the OK soft key to accept the change or the Cancel soft key to cancel.
If you want to delete all paging groups, you can press the Del All soft key.
You can also configure the phone to use a default codec for sending multicast RTP stream via
web user interface.
To configure a default codec for multicast paging via web user interface:
Click on Features->General Information.
1.
Select the desired codec from the pull-down list of Multicast Codec.
2.
The default codec is G722.
Click Confirm to accept the change.
3.
Note
If G722 codec is used for multicast paging, the LCD screen will display the
that it is providing high definition voice.
Default codec for multicast paging is configurable via web user interface only.
or to select a desired group.
Using Your Phone with SIP/Cloud Account
icon to indicate
109