Key As Send; Phone Lock - Yealink CP860 User Manual

User Guide for the CP860 HD IP Conference Phone
Enter the new password in the New PWD field.
3.
Re-enter the new password in the Confirm PWD field.
4.
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
Administrator password is configurable via web user interface at the path Security->Password.

Key As Send

You can set the "#" key or "*" key to perform as a send key while dialing.
To configure key as send via phone user interface:
Press Menu->Features->Key As Send.
1.
Press the
2.
disable this feature.
Press the Save soft key to accept the change or the Back soft key to cancel.
3.
Key as send is configurable via web user interface at the path Features->General Information.

Phone Lock

You can lock your phone temporarily when you are not using it. This feature helps to protect
your phone from unauthorized use.
Phone lock consists of the following:
Menu Key:
Function Keys:
All Keys:
30
or soft key to select # or * from the Key As Send field, or select Disabled to
The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
The function keys are locked. You cannot use the mute key, redial
key, OK key, up and down navigation keys and soft keys until
unlocked.
All keys are locked, except the Volume key, on-hook key, off-hook
key, * key, # key and digit keys. You are only allowed to dial
emergency numbers, reject by pressing the Reject soft key or
on-hook key, answer incoming calls by pressing the Answer soft
key or off-hook key, and end a call by pressing the EndCall soft key