Phone Status - Yealink CP860 User Manual

Press the Next soft key to continue.
6.
Configure the SIP account information.
7.
For more information, refer to
Press the Finish soft key to complete the setup wizard.
8.
After you complete these steps, the LCD screen prompts the following, and then the phone goes
to the idle screen.

Phone Status

You can view phone status via phone user interface or web user interface.
Available information of phone status includes:
Network status (IPv4 status or IPv6 status, IP mode and MAC address).

IPv4 uses a 32-bit address.
-
IPv6 is an updated version of the current Internet Protocol to meet the increased
-
demands for unique IP addresses, using a 128-bit address.
Phone status (product name, hardware version, firmware version, product ID, MAC address

and device certificate status).
Account (SIP, Yealink Cloud or PSTN) status

To view the phone status via phone user interface:
Press
1.
Press
2.
To view the phone status via web user interface:
Open a web browser on your computer.
1.
Enter the IP address in the browser's address bar, and then press the Enter.
2.
Account Registration
Complete the Wizard!
Initializing...Please Wait
, or press Menu->Status.
or to scroll through the list and view the specific information.
Getting Started
on page 58.
17