Answering Calls - Yealink CP860 User Manual

User Guide for the CP860 HD IP Conference Phone
set neither. For more information, refer to the
The CP860 IP conference phone can handle multiple calls at a time. However, only one active
call (the call that has audio associated with it) can be in progress at any given time. And one
PSTN account can only support one call.
To place multiple calls:
You can have more than one call on your CP860 IP conference phone. To place a new call during
an active call, do one of the following:
- Press . The active call is placed on hold.
Enter the desired number using the keypad.
Press ,
- Press the Hold soft key to place the original call on hold.
Press the NewCall soft key.
Enter the desired number using the keypad.
Press
You can press
retrieve the desired call.

Answering Calls

You can answer a call no matter whether you are in another call or not. But one PSTN account
can only support one call.
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call:
Press ,
Answering When in Another Call
If you have an active call, and an incoming call arrives on the phone, do one of the following:
Press the Answer soft key.
-
The incoming call is answered and the original call is placed on hold.
Press to access the new call.
-
Press
The incoming call is answered and the original call is placed on hold.
134
, or the Send soft key.
, , or the Send soft key.
or to switch between calls, and then press the Resume soft key to
or the Answer soft key.
, or the Answer soft key.
Key As Send on page 30.