Call Hold/Resume; Holding A Call; Resuming A Held Call - Yealink TPGBizPhone Standard T43U User Manual

Call Hold/Resume

You can place an active call on hold and resume the call when you are ready. When you place a call on hold, the held
party may hear the music played by its server.

Holding a Call

Press the HOLD key or select Hold during a call.
The phone ignores engaged audio device (handset or headset) and plays beep in the Speakerphone (hands-free)
mode by default. The Speakerphone key will always light up and the phone will beep softly every 30
seconds to remind you that you still have a call on hold.
Note: When you have multiple calls on the phone and the current call is held, you can prss the corresponding line key
to swap the active call.

Resuming a Held Call

You can view and resume a held call on the phone.
Press the HOLD key again, corresponding line key or Resume.
If multiple calls are place on hold, select the desired call first.
TPG BizPhone Standard T43U IP Phone User Guide
P a g e | 21
Confidential