Music On Hold - Yealink CP860 User Manual

User Guide for the CP860 HD IP Conference Phone
To end the multicast RTP session, press the EndCall soft key.

To send RTP stream via a paging list key when the receiver's phone is idle:
Press the paging list key when the phone is idle.
1.
Press or
2.
Press the Paging soft key to send RTP.
3.
Your can do the following:
4.
To place the current multicast RTP session on hold, press the Hold soft key.

The sender's phone places the multicast RTP session on hold and receiver's phone
releases the session.
To resume the held multicast RTP session, press the Resume soft key.
The multicast RTP session is established again.
To end the multicast RTP session, press the EndCall soft key.

Multicast RTP is one way only from the sender to the multicast address(es) (receiver). For
Note
outgoing RTP multicasts, all other existing calls on the phone will be placed on hold.

Music on Hold

Music on hold (MoH) is the business practice of playing recorded music to fill the silence that
would be heard by the party placed on hold. To use this feature, you should specify a SIP URI
pointing to a Music on Hold Server account. When a call is placed on hold, the phone will send a
SIP INVITE message to the Music on Hold Server account. The Music on Hold Server account
automatically answers the SIP INVITE messages and immediately plays audio from some source
located anywhere (LAN, Internet) to the held party. Contact your system administrator for the
SIP URI.
To configure music on hold server via web user interface:
Click on Account->Advanced.
1.
112
to select the desired paging group.