Basic Call Features; Placing Calls; Using Your Phone With Pstn Account On - Yealink CP860 User Manual

Press or
2.
Press the Save soft key to accept the change.
3.
The required flash time may be different in different countries or for different gateways/PBX
Note
servers. For more information, contact your system administrator.

Basic Call Features

Placing Calls

You can press the off-hook key either before or after entering the number to place a call. You
can also dial an entry from call history, local directory, favorite directory or remote phone book.
For more information, refer to
on page 49.
The call duration and far-site's information (name or phone number) are visible on the LCD
screen. In the figure below, the call to 2248 has lasted 53 seconds.
To place a call:
Do one of the following:
Press to obtain a dial tone (You can press the Switch soft key to select the desired
-
PSTN account).
Enter the desired number using the keypad.
Press
Enter the desired number using the keypad.
-
Press
The # key is configured as a send key by default. You can also set the * key as the send key, or
to select the desired value.
Contact Management
, , or the Send soft key.
, , or the Send soft key.
Using Your Phone with PSTN Account
on page 35 and Call History Management
133