User Guide for the CP860 HD IP Conference Phone
Power over Ethernet
With the included or a regular Ethernet cable, the CP860 IP conference phone can be powered
from a PoE-compliant switch or hub.
To connect the PoE:
Connect the Ethernet cable between the Internet port on the phone and an available port
1.
on the in-line power switch/hub.
If in-line power switch/hub is provided, you don't need to connect the phone to the power
Note
adapter. Make sure the switch/hub is PoE-compliant.
Important! Do not unplug or remove power to the phone while it is updating firmware and
configurations.
Connecting the Optional Expansion Microphone CPE80
You can connect optional expansion microphone to enhance the room coverage of the
conference phone.
12