Recall; Call Mute - Yealink CP860 User Manual

User Guide for the CP860 HD IP Conference Phone
Press the OK soft key, the phone returns to the idle screen and call completion is activated.
1.
When the called party becomes idle, the following prompt will appear on the LCD screen of the
phone:
Press the OK soft key to redial the number.
2.
Note Call completion is not available on all servers. For more information, contact your system
administrator.

ReCall

You can press a recall key to place a call back to the last incoming call.
To configure a recall key via web user interface:
Click on Dsskey->Programable Key.
1.
Select the desired programable key.
2.
Select ReCall from the pull-down list of Type.
3.
Click Confirm to accept the change.
4.
A recall key is configurable via web user interface only.
Note

Call Mute

You can mute the local microphone during an active call so that the other party cannot hear you,
but you can still hear the other party. You can also mute the microphone while dialing so that
the other party cannot hear you when the call is set up. It helps prevent the other party from
hearing the informal discussion when auto answer is enabled on his/her phone.
78