Yealink CP860 User Manual page 104

User Guide for the CP860 HD IP Conference Phone
If you want to park the call against the local extension.
a)
Press
1)
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
If you want to park the call against desired extension.
b)
Enter an extension (e.g., 4605) where you want to park the call.
1)
Press
2)
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
To retrieve a parked call in FAC mode:
Do one of the following:
1.
If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).
-
If the park retrieve code is configured, press the Retrieve soft key on the dialing
-
screen.
The phone will dial the configured park retrieve code and the Retrieve screen appears
as below:
Follow the voice prompt, do one of the following:
2.
Press
-
Enter the desired extension followed by # (e.g., 4605#) on any phone.
-
Transfer Mode
To configure call park feature in transfer mode via web user interface:
Click on Features->Call Pickup.
1.
Select Transfer from the pull-down list of Call Park Mode.
2.
Select Enabled from the pull-down list of Call Park.
3.
If Enabled is selected, the Park soft key will display on the LCD screen during a call, and
the Retrieve soft key will display on the dialing screen.
(Optional.) Enter the call park code in the Call Park Code field.
4.
It is configured for the Park soft key.
(Optional.) Enter the park retrieve code in the Park Retrieve Code field.
5.
92
.
or .
on the phone where the call is parked.