Installing The Appliance Hardware; Registering The Hardware - NetApp StorageGRID Webscale 10.4 Installation And Maintenance Manual

20

Installing the appliance hardware

Hardware installation includes several major tasks, including installing hardware components,
cabling those components, and configuring ports.
Steps
1. Registering the hardware
2. Installing the hardware
3. Installing the E5600SG controller in the enclosure
4. Cabling the appliance
5. Connecting the AC power cords
6. Turning power on
7. Viewing boot-up status and reviewing error codes on the controllers
8. Configuring the management ports
9. Verifying connectivity
10. Configuring the AutoSupport tool for the StorageGRID Webscale appliance
11. Changing the RAID volume configuration settings

Registering the hardware

Registering the hardware provides support benefits.
Steps
1. Go to the NetApp Support Site at
2. Log in to your existing NetApp Support Site account or create an account.
• If you already have a registered account, you can log in to it and add the StorageGRID
Webscale appliance to your existing account.
• If you are a new customer, click Register Now, located at the top of the Support Site.
3. Select Products > Register Products.
A product registration page opens.
4. Enter the product serial number, and click Submit.
You can find the serial number on the packing slip, in your confirmation email, or on the
appliance itself.
5. On the product details page, enter the requested details, and click Submit to complete your
product registration.
on page 20
on page 21
on page 23
on page 25
on page 26
on page 30
on page 36
mysupport.netapp.com
on page 22
on page 27
on page 39
.
on page 37