Table of Contents
Advertisement
Installation overview
Typically, installation is performed in two phases: the hardware installation in the data center and,
later, the software installation.
Hardware installation
The hardware installation occurs before the software installation, even months before, and someone
other than the software installer can perform it. Installation of the physical components requires the
following:
•
Physical access to the StorageGRID Webscale appliance hardware
•
Knowledge of the IP address for the network where SANtricity Storage Manager is installed
•
Knowledge of the IP address for the Admin network for StorageGRID Webscale
Software installation
The software installation occurs after the hardware installation. Installation of the software requires
knowledge about the following:
•
StorageGRID Webscale software
•
Grid network IP addresses
•
Client network IP addresses, if used
For details, see StorageGRID Webscale software installation instructions.
Related information
StorageGRID Webscale 10.4 Software Installation Guide for VMware Deployments
StorageGRID Webscale 10.4 Software Installation Guide for OpenStack Deployments
StorageGRID Webscale 10.4 Software Installation Guide for Red Hat Enterprise Linux
Deployments
19
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageGRID Webscale 10.4 and is the answer not in the manual?
Questions and answers