Table of Contents
Advertisement
Preparing the site
Installing the controllers and drive trays into the cabinet requires some preparation.
About this task
You must do the following to prepare the site:
•
Prepare the site for the cabinet and its requirements: for example, temperature, humidity, altitude
range, airflow, heat dissipation, wiring, power, and grounding.
•
Prepare the network for the controllers.
•
Ensure that the cabinet in which the appliance will be mounted meets the installation site
specifications for E-Series storage arrays.
For details, see the
Related information
E-Series Site Preparation Guide
StorageGRID Webscale appliance connections
Before installing the StorageGRID Webscale appliance, make sure you understand how the controller
ports are used.
The controllers in the StorageGRID Webscale appliance include the following ports. The diagram
shows the SG5660 model; the controllers in the SG5612 model are side by side instead of stacked.
E-Series Site Preparation Guide .
Planning your deployment | 15
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageGRID Webscale 10.4 and is the answer not in the manual?
Questions and answers