Advertisement
Quick Links
H600S Series Storage Nodes
Installation and Setup Instructions
Prepare for installation | Stage 1
In the box
You provide
Rack space
1U per chassis
Access online
Prepare for installation
1
H600S series storage node
One cable with
RJ45 connector
for out-of-band
management
Two SFP28
or SFP+ cables
Two cables with
RJ45 connectors for
cluster management
• Element Software documents
• End User License Agreement
• Hardware Universe (HWU)
Install hardware
Cable the node
2
Power cables
(Two per chassis)
Monitor with a VGA connection
and keyboard with a
standard USB connection
• How to access BMC and change IP address on H610S
• NetApp SolidFire Resources page
• Rail Kit Installation
Configure the node
Create a new cluster
3
4
Slide rail kit
Any operating system (OS)
client with a browser
215-14060_A0
5
Advertisement
Related Manuals for NetApp H600S Series
Summary of Contents for NetApp H600S Series
- Page 1 Prepare for installation Install hardware Cable the node Configure the node Create a new cluster H600S Series Storage Nodes Installation and Setup Instructions Prepare for installation | Stage 1 In the box H600S series storage node Power cables Slide rail kit...
- Page 2 NetApp Element software UI by entering the node’s IP address. Enter the required information in the Create a New Cluster window. See the NetApp Element Software Setup Guide for instructions. You can access the latest version of the Setup Guide from the NetApp SolidFire Resources page.