Table of Contents
Advertisement
38 | StorageGRID Webscale 10.4 Appliance Installation and Maintenance Guide
Message types
Event messages
Daily messages
Weekly messages
Steps
1. From the Enterprise Management Window in SANtricity Storage Manager, select the Devices tab,
and then select Discovered Storage Arrays.
2. Select Tools > AutoSupport > Configuration.
3. Use SANtricity Storage Manager online Help, if needed, to complete the task.
Related information
NetApp Documentation: SANtricity Storage Manager
Configuring StorageGRID Webscale appliance passwords
Setting up AutoSupport requires that you configure passwords for the appliance. Setting passwords
maintains system security.
Steps
1. From the Enterprise Management Window in SANtricity Storage Manager, double-click the
controller.
2. From the Array Management Window, select the Storage Array menu, and select Security > Set
Password.
3. Configure the password.
4. Use SANtricity Storage Manager online Help, if needed, to complete the task.
Configuring email and SNMP alarm targets
Configuring AutoSupport requires that you identify email for notifications and SNMP alarm targets.
This enables administrators to receive timely information about alarms and operations.
Steps
1. From the Enterprise Management Window in SANtricity Storage Manager, select the Devices tab,
and then select a node.
2. Select Edit > Configure Alerts.
3. Use SANtricity Storage Manager online Help, if needed, to complete the task.
Description
•
Sent when a support event on the managed storage array occurs
•
Include system configuration and diagnostic information
•
Sent once every day during a user configurable time interval in the
local time of the storage array
•
Include the current system event logs and performance data
•
Sent once every week during a user configurable time interval in the
local time of the storage array
•
Include configuration and system state information
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageGRID Webscale 10.4 and is the answer not in the manual?
Questions and answers