Table of Contents
Advertisement
22 | StorageGRID Webscale 10.4 Appliance Installation and Maintenance Guide
Task
Install enclosure in rack
Install drives in drive drawer
Related information
E2700 Controller-Drive Tray and Related Drive Trays Installation Guide
E5600 Controller-Drive Tray and Related Drive Trays Installation Guide
Installing the E5600SG controller in the enclosure
If the E5600SG controller is not installed when you receive the enclosure, you might need to install it
into Slot B.
About this task
You can skip this procedure if the E5600SG controller is already installed in the enclosure.
Steps
1. Remove the insert that was placed in Slot B for shipment.
In the SG5660 enclosure, Slot B is the bottom slot. In the SG5612 enclosure, Slot B is the slot on
the right.
2. Install the E5600SG controller into Slot B.
After you finish
Continue with cabling the appliance.
Description
Install the DE1600 enclosure or DE6600 enclosure in the rack.
If you are lifting the DE6600 enclosure by hand, attach the four
enclosure handles for easier lifting. You can remove these
handles later.
For the SG5660 model, install the drives in the DE6600
enclosure drive drawer.
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageGRID Webscale 10.4 and is the answer not in the manual?
Questions and answers