Table of Contents
Advertisement
52
Where to go next
After you install the StorageGRID Webscale appliance, you might want to perform additional
StorageGRID Webscale configuration steps.
You might want to complete the following tasks:
•
Install and configure the StorageGRID Webscale software.
See the software installation instructions.
Administrator Guide for configuration information.
See the
•
Integrate and verify client API connections (CDMI, S3, or Swift).
See the appropriate API guide.
You use SANtricity Storage Manager to complete the following tasks:
•
Connect to each StorageGRID Webscale appliance.
•
Verify receipt of AutoSupport data.
For details, see the StorageGRID Webscale and SANtricity documentation.
Related information
StorageGRID Webscale 10.4 Administrator Guide
StorageGRID Webscale 10.3 Cloud Data Management Interface Implementation Guide
StorageGRID Webscale 10.4 S3 (Simple Storage Service) Implementation Guide
StorageGRID Webscale 10.4 Swift Implementation Guide
StorageGRID Webscale 10.4 Software Installation Guide for OpenStack Deployments
StorageGRID Webscale 10.4 Software Installation Guide for VMware Deployments
StorageGRID Webscale 10.4 Software Installation Guide for Red Hat Enterprise Linux
Deployments
NetApp Documentation: SANtricity Storage Manager
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageGRID Webscale 10.4 and is the answer not in the manual?
Questions and answers