Related Information
"Boot the OS (Oracle ILOM)" on page 35
■
"Boot the OS Manually (OpenBoot)" on page 35
■
Boot the OS (Oracle ILOM)
By default, the host automatically attempts to boot when the host is reset or powered on.
1.
Log in to Oracle ILOM.
See
"Log In to Oracle ILOM" on page
If you have a modular system, ensure that you are logged in to the desired server
Note -
module.
2.
If the OpenBoot parameters are configured with default values, boot the host
using one of these methods:
Oracle ILOM web interface – In Host Management > Power Control, select any of the
■
reset, power on, or power cycle actions, and click Save.
Oracle ILOM CLI – Type:
■
-> reset /System
If the OpenBoot parameters are not configured with default values, when you reset the
Note -
host, the host might stop at the OpenBoot prompt. To boot from the OpenBoot prompt, see
"Boot the OS Manually (OpenBoot)" on page
Related Information
"Boot the OS Manually (OpenBoot)" on page 35
■
"Boot Sequence" on page 34
■
Boot the OS Manually (OpenBoot)
Use this procedure when you are at the OpenBoot prompt, and you want to boot the OS.
17.
35.
Booting and Shutting Down the OS
Boot the OS (Oracle ILOM)
35