Oracle SPARC Administration Manual page 62

Reset the Values in the SP to Default Values
2. Reset the SP to the default values.
-> set /SP reset_to_defaults=value
where value can be:
all – Removes all of the SP configuration data.
■
factory – Removes all of the SP configuration data and also all log files.
■
Power off and restart the host to complete the setting change.
3.
-> stop /System
-> reset /SP
Related Information
"Power Off the Server (Oracle ILOM CLI)" on page 24
■
62 SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016