View All Openboot Parameters; Openboot Configuration Parameters - Oracle SPARC Administration Manual

View All OpenBoot Parameters

View all of the OpenBoot parameters using one of these methods:
1.
From the OpenBoot prompt, type:
■
From Oracle Solaris, type:
■
View the value for an individual OpenBoot parameter using one of these
2.
methods:
From the OpenBoot prompt, type:
■
where parameter is a valid OpenBoot parameter.
From Oracle Solaris, type:
■
where parameter is a valid OpenBoot parameter.
Related Information
"OpenBoot Configuration Parameters" on page 47
■
"printenv Output" on page 48
■

OpenBoot Configuration Parameters

Parameter
auto-boot-on-error?
auto-boot?
boot-command
printenv
eeprom
printenv
parameter
eeprom
Default Value Description
Controls whether or not the host attempts to boot after POST detects a
false
nonrecoverable error.
■ false – Host does not attempt to boot and stops at the ok prompt.
■ true – Host automatically attempts to boot.
Controls whether or not the host automatically boots after a system reset or
true
when the power is turned on.
■ true – Host automatically attempts to boot from the devices specified in
boot-device.
■ false – Host does not attempt to boot and stops at the ok prompt.
Specifies the command to be executed when auto-boot? is true. Valid boot
boot
commands:
■ boot – Boots kernel from devices specified in boot-device.
■ boot net – Boots kernel from the network.
■ boot cdrom – Boots kernel from the CDROM.
View All OpenBoot Parameters
parameter
Configuring Boot and Restart Behavior 47