Obtain The Openboot Prompt (Oracle Ilom Web Interface) - Oracle SPARC Administration Manual

4. Switch communication to the host.
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Serial console started. To stop, type #.
The server might take several minutes to complete POST and then displays the OpenBoot
prompt.
Related Information
"OpenBoot Overview" on page 13
■
"Configuring Boot and Restart Behavior" on page 43
■
"Obtain the OpenBoot Prompt (Oracle Solaris)" on page 39
■
"Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)" on page 41
■
Obtain the OpenBoot Prompt (Oracle ILOM Web
Interface)
Use this procedure when the host is powered down, and you want to get to the ok prompt when
the host is powered on.
1. Log in to Oracle ILOM.
See "Log In to Oracle ILOM" on page
If you have a modular system, ensure that you are managing the desired server module.
Note -
2. In the Oracle ILOM web interface, in the left navigation pane, select Host
Management > Host Boot Mode.
The Host Boot Mode page is displayed.
3. Apply these changes to the Host Boot Mode Settings:
a. For State, select: Reset NVRAM
This setting applies a one-time NVRAM (OpenBoot) change based on the script setting,
then resets the NVRAM to default settings on the next host reset.
For Script, type:
b.

Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)

17.
setenv auto-boot? false
Booting and Shutting Down the OS 41