Disable Or Reenable Network Access To The Sp; Display The Sp Network Parameters - Oracle SPARC Administration Manual

Disable or Reenable Network Access to the SP

To use an in-band connection to the SP, see
■
Management" on page
Related Information
Oracle ILOM Documentation
■
"Oracle ILOM Overview" on page 11
■
"Log In to Oracle ILOM" on page 17
■
Disable or Reenable Network Access to the SP
At the Oracle ILOM prompt, type:
-> set /SP/network state=value
where value can be:
enabled (Default)
■
■
disabled
Related Information
"Log In to Oracle ILOM" on page 17
■
"SP Network Address Options" on page 63
■

Display the SP Network Parameters

This procedure displays information such as the network address for the SP.
At the Oracle ILOM prompt, type:
1.
-> show /SP/network
Find the relevant property in the output.
2.
If you want the IP address of the SP, view the ipaddress property in the output. For
■
example:
64 SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016
"Oracle ILOM In-band (Sideband)
66.