Obtaining The Openboot Prompt; Openboot Prompt - Oracle SPARC Administration Manual

Obtaining the OpenBoot Prompt

SPARC T5-2, No Keyboard
Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights
reserved.
OpenBoot 4.33.1, 32256 MB memory available, Serial #xxxxxxxx.
Ethernet address 0:xx:xx:xx:xx:xx, Host ID: xxxxxxxx.
{0} ok
Related Information
"Shut Down the OS (init Command)" on page 36
■
Obtaining the OpenBoot Prompt
There are several ways to reach the OpenBoot prompt (ok).
"OpenBoot Prompt" on page 38
■
"Obtain the OpenBoot Prompt (Oracle Solaris)" on page 39
■
"Obtain the OpenBoot Prompt (Oracle ILOM CLI)" on page 40
■
"Obtain the OpenBoot Prompt (Oracle ILOM Web Interface)" on page 41
■
Related Information
"Log In to Oracle ILOM" on page 17
■
"Booting and Shutting Down Oracle Solaris" on page 33
■

OpenBoot Prompt

When the host is powered on but the OS is not booted, you communicate with the OpenBoot
firmware. OpenBoot firmware displays ok as its prompt.
This table lists the common tasks that are performed at the ok prompt:
Task
Boot the host.
Configure OpenBoot parameters.
38 SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016
For More Information
"Boot the OS Manually (OpenBoot)" on page 35
"View All OpenBoot Parameters" on page 47