Printing G4 Memory Dump (Function 17); Printing G4 Protocol Dump List (Function 17) - Ricoh 5510L Service Manual

14 June, 2002

5.1.29 PRINTING G4 MEMORY DUMP (FUNCTION 17)

Use this function to print the D-channel layer 1 dump list.
1. Enter the Service Mode
$ &
2.
'
3.
)
)
4. Input the range of addresses that you
wish to print.
Example: Addresses 07EB00 to 07ECFF:
% & / 0 % & / 1 !
Input
Layer 1 memory dump information is stored in the following addresses:
07EB00(H) to 07ECFF(H).

5.1.30 PRINTING G4 PROTOCOL DUMP LIST (FUNCTION 17)

1. From the G4 service mode menu,
(
press .
2. Either:
• To print a protocol dump list for the D channel and B channel 1: press
• To print a protocol dump list for the D channel and B channel 2:
!
Then press
G4 Dump "D+BCH1", "D+BCH2":
Up to 2 kbytes data is stored. When the data exceeds this limit, it is
overwritten (The oldest data is overwritten first, also see G4 internal switch
03 bit 0).
D+BCH2 data is logged only when there is dual communication.
• To print a protocol dump list for the D channel:
Up to 2 kbytes data is stored.
• To print a protocol dump list for the B channel 1 link layer:
• To print a protocol dump list for the B channel 2 link layer:
• To print a protocol dump list for the D channel link layer:
SERVICE LEVEL FUNCTIONS
.
)
5-13
H310S607.BMP
H310S608.BMP
!
)
!*
x 2
) !
x 3
) !
x 4
) !
x 5