Wifi Status - CAB EOS1 Configuration Manual

28 5 Test Functions
5.6

WiFi Status

Access only when a WLAN adapter is installed!

The WiFi status function prints out a list the most important parameters of the accessible Wireless Access Points.
The printout occurs using the heat level and print speed specified in the Setup > Print param. menu.
Notice!
i
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start Offline menu.
 Select Test > WiFi status.
The printout can be cancelled with
Fri Sep 23 12:53:54 2011
EOS1/300
Firmware V4.02 (Sep 21, 2011) - #170110417590
Channel Name/BSS ID
1 default
00:24:b2:36:98:60
1 cab-firma
00:24:b2:36:98:61
1 cab-gast
00:24:b2:36:98:62
11 default
00:24:b2:36:98:60
11 cab-firma
00:24:b2:36:98:61
11 cab-gast
00:24:b2:36:98:62
Fig. 14
The parameters have the following meaning :
Column
Channel
Name/BSS ID
Signal level
Encryption
Table 14
.
WiFi status
Signal level Encryption
●●●●●
WPA-PSK-TKIP
●●●●●
WPA-PSK-TKIP
●●●●●
WPA-PSK-TKIP
●○○○○
WPA-PSK-TKIP
●○○○○
WPA-PSK-TKIP
○○○○○
WPA-PSK-TKIP
WiFi status
Meaning
Channel; frequency range of the Access Point
Name of the wireless LAN
MAC address of the Access Points
Scale of the WiFi signal strength
Type of data encryption
Parameters of the WiFi status
28