Wifi Status - CAB eos 4 Configuration Manual

5 Test Functions
5.6

WiFi Status

Access only when a WLAN adapter is installed!

The WiFi status function prints out a list the most important parameters of the accessible Wireless Access Points.
The printout occurs using the heat level and print speed specified in the Setup > Print param. menu.
Notice!
i
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start Offline menu.
 Select Test > WiFi status.
The printout can be cancelled with
WiFi status
Mon Jan 21 07:49:49 2013
EOS1/300
Firmware V4.13 (Jan 15, 2013) - #170113310794
Channel Name/BSS ID
1 default
00:24:b2:36:98:60
1 cab-firma
00:24:b2:36:98:61
1 cab-gast
00:24:b2:36:98:62
11 default
00:24:b2:36:98:60
11 cab-firma
00:24:b2:36:98:61
11 cab-gast
00:24:b2:36:98:62
Fig. 16 WiFi status
The parameters have the following meaning :
Column
Channel
Name/BSS ID
Signal level
Encryption
Table 15 Parameters of the WiFi status
.
Signal level Encryption
●●●●●
WPA-PSK-TKIP
●●●●●
WPA-PSK-TKIP
●●●●●
WPA-PSK-TKIP
●○○○○
WPA-PSK-TKIP
●○○○○
WPA-PSK-TKIP
○○○○○
WPA-PSK-TKIP
Meaning
Channel; frequency range of the Access Point
Name of the wireless LAN
MAC address of the Access Points
Scale of the WiFi signal strength
Type of data encryption
31