Font List - CAB EOS1 Configuration Manual

26 5 Test Functions
5.4

Font List

The Font list function prints the most important parameters of the fonts available in the printer in tabular form.
The table contains both the original fonts in the printer and other fonts loaded into the printer. The printout occurs
using the heat level and print speed specified in the Setup > Print param. menu.
Notice!
i
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start Offline menu.
 Select Test > Font list.
The printout can be cancelled with
Fri Sep 23 11:27:49 2011
EOS1/300
Firmware V4.02 (Sep 21, 2011) - #170110417590
Nr. Name
-1 _DEF1
-2 _DEF2
-3 _DEF3
-4 OCR_A_I
-5 OCR_B
3 BX000003
5 BX000005
596 BX000596
1000 GHEI21M
1010 GARUDA
Fig. 12
Column
No.
Name
Type
Description
Table 12
.
Font list
Type Description
Bitmap Default Font 12x12 dots
Bitmap Default Font 16x16 dots
Bitmap Default Font 16x32 dots
Bitmap OCR-A Size I
Bitmap OCR-B
TrueType Swiss 721
TrueType Swiss 721 Bold
TrueType Monospace 821
TrueType AR Heiti Medium GB-Mono
TrueType Garuda
Font list
Meaning
ID number of the font required for programming (command T).
Name with which the font is saved internally.
Type of font generation. It provides information on the variability of the font and is important when
programming (command T).
Explanations of the font: size, font family. The printout occurs in the appropriate font.
Parameters of the Font list
26