Font List - CAB eos 4 Configuration Manual

5 Test Functions
5.4

Font List

The Font list function prints the most important parameters of the fonts available in the printer in tabular form.
The table contains both the original fonts in the printer and other fonts loaded into the printer. The printout occurs
using the heat level and print speed specified in the Setup > Print param. menu.
Notice!
i
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
 Insert printable medium (labels, endless paper) which extends across the entire printing width.
 If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
 Start Offline menu.
 Select Test > Font list.
The printout can be cancelled with
Font list
Mon Jan 21 07:43:56 2013
EOS1/300
Firmware V4.13 (Jan 15, 2013) - #170113310794
Nr. Name Type
-1 _DEF1 Bitmap
-2 _DEF2 Bitmap
-3 _DEF3 Bitmap
-4 OCR_A_I Bitmap
-5 OCR_B Bitmap
3 BX000003 TrueType Swiss 721
5 BX000005 TrueType Swiss 721 Bold
596 BX000596 TrueType Monospace 821
1000 GHEI21M TrueType AR Heiti Medium GB-Mono
1010 GARUDA TrueType Garuda
Fig. 14 Font list
Column
No.
Name
Type
Description
Parameters of the Font list
Table 13
.
Description
Default Font 12x12 dots
Default Font 16x16 dots
Default Font 16x32 dots
OCR-A Size I
OCR-B
Meaning
ID number of the font required for programming (command T).
Name with which the font is saved internally.
Type of font generation. It provides information on the variability of the font and is important when
programming (command T).
Explanations of the font: size, font family. The printout occurs in the appropriate font.
29