Font List - CAB A2+ User Configuration Manual

5 Test Functions
5.4

Font List

Function not available at A2+ !

The Font list function prints the most important parameters of the fonts available in the printer in tabular form.
The table contains both the original fonts in the printer and other fonts loaded into the printer. The printout occurs
using the heat level and print speed specified in the Setup > Print param. menu.
Notice!
i
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.

Insert printable medium (labels, endless paper) which extends across the entire printing width.

If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Press the menu button.


Select Test > Font list print menu.
 Start printout with the  button.
The printout can be cancelled with the cancel button.
Mach4/300 - 10/09/2007 -15:08:36
Firmware V3.11 (Aug 9 2007) - #111070553751
No. Name Type
-1 _DEF1 Bitmap
-2 _DEF2 Bitmap
-3 _DEF3 Bitmap
-4 OCR_A_I Bitmap
-5 OCR_B Bitmap
3 BX000003 TrueType Swiss 721
4 BX000005 TrueType Swiss 721 Bold
596 BX000596 TrueType Monospace 821
Fig. 12 Font List
The parameters have the following meaning :
Column
No.
Name
Type
Description
Table 16 Parameters of the Font list
Font list
Description
Default Font 12x12 dots
Default Font 16x16 dots
Default Font 16x32 dots
OCR-A Size I
OCR-B
Meaning
ID number of the font required for programming (command T).
Name with which the font is saved internally.
Type of font generation. It provides information on the variability of the font and is important when
programming (command T).
Explanations of the font: size, font family. The printout occurs in the appropriate font.
1