On-Board Computer (Vehicles Without Steering Wheel Buttons) - Mercedes-Benz Metris Operating Instructions Manual

On-board computer (vehicles without steering wheel buttons)

176
On-board computer (vehicles with-
out steering wheel buttons)
Operating the on-board computer
Overview
È and 3 buttons
:
Display
;
f and g buttons
=
X
To activate the on-board computer: turn
the key to position 1 in the ignition lock.
If you remove the key, then quickly re-insert it
and turn to position 1, the on-board computer
and instrument cluster are not activated.
You can control the display messages and set-
tings in the on-board computer with but-
tons : and = on the instrument cluster.
Buttons on the instrument cluster
G
WARNING
If you are driving and reach through the
steering wheel to operate the adjustment
knob, you could lose control of the vehicle.
There is a risk of an accident and injury.
Only operate the adjustment knobs when
the vehicle is stationary. Do not reach
through the steering wheel when driving.
È Press briefly:
Selects the menu or display
R
in menu Settings, leaves the
R
submenu without adopting the
last setting and returns to the
main menu
È Press and hold:
Returns to the standard display
R
or the Distance menu without
adopting the last setting
Press briefly:
3
Selects a submenu or function
R
Confirms the selected entry in
R
the list or the display, or confirms
the setting
Press and hold:
3
Resets the trip odometer and trip
R
computer values
in the main menu of the
R
tings
menu: resets settings to
the factory settings
in menu Settings, resets values
R
and returns to the main menu
Sets the instrument cluster light-
f
R
ing (not in the
g
Scrolls through lists
R
Changes values or settings
R
Display
Instrument cluster display
Y
Clock ( page 192)
:
Y
V Cruise control (
Permanent display: outside temperature or
;
Y
speed ( page 180)
Set‐
Settings
menu)
page 146)