Diagnostics
3.1
Diagnostics using LED display
Power module
LED displays on the power module:
①
②
Status and error displays by means of LEDs on power modules
The table below shows the status and error displays on the power module.
Event (LEDs)
SF
PWR
On
Off
Power module PM-E DC24V HF (6ES7138-4CA60-0AB0)
Manual, 06/2010, A5E02515369-02
1
2
Batch error (red)
Load voltage (green)
Cause
No parameter assignment or incorrect
module plugged in. A diagnostic message
is pending.
There is no load voltage at the power
module.
Remedy
Check the parameter assignment.
Evaluate the diagnostics.
Check the load voltage.
3
13