Basket Pulley - Whirlpool CHW9050 Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the drive belt (See page 4-31).
15/16" Nut

Basket Pulley

Drive Belt
BASkET PULLEY
4. Block the pulley to the back of the outer tub
to keep the spin basket from moving.
5. Remove the 15/16" nut securing the pulley
to the spin basket.
6. Pull the pulley off the shaft.
NOTE: When reinstalling the 15/16" nut,
make sure to use thread lock on the threads
and that it is tightened to between 50-60
foot pounds. If not tightened sufficiently the
washer may produce knocking noises that
sound like a failed bearing.
4-33