Table of Contents
Advertisement
CODE
CODE
EXPLANATION
6 01
REGULAR CYCLE PRICE (Factory Default)
REGULAR CYCLE PRICE (Factory Default)
6 01
6 01
When the d.xx is set to d.CS, this 6 xx value
6 01
When the d.xx is set to d.CS, this 6 xx value
represents the number of push-in actuations of the
represents the number of push-in actuations of the
coin slide to start the washer. 6 01 would equal one
coin slide to start the washer. 6 01 would equal one
coin slide activation.
coin slide activation.
6 00
When the d.xx is set to d.00, this 6 xx value
6 00
When the d.xx is set to d.00, this 6 xx value
represents the number of coins needed to start the
represents the number of coins needed to start the
washer; may adjust from 0–39. Change this value
washer; may adjust from 0–39. Change this value
by pressing the HOT button. 6 07 = 7 coins. 9060
by pressing the HOT button. 6 07 = 7 coins. 9060
models default to 6 00.
models default to 6 00.
g
Press the WARM button once to advance
g
Press the WARM button once to advance
to next code.
to next code.
ADDITIONAL RINSE OPTION
8 00
8 00
ADDITIONAL RINSE OPTION
This option is either SELECTED 'ON' or NOT
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
SELECTED 'OFF'.
8
00
Not Selected 'OFF'.
8
00
Not Selected 'OFF'.
8
Ar
Selected 'ON'.
8
Ar
Selected 'ON'.
Press the COLD button once for this selection.
Press the COLD button once for this selection.
g
Press the WARM button once to advance
g
Press the WARM button once to advance
to next code.
to next code.
9 00
CYCLE COUNTER OPTION
9 00
CYCLE COUNTER OPTION
This option is either SELECTED 'ON' or NOT
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
SELECTED 'OFF'.
9
00
Not Selected 'OFF'.
9
00
Not Selected 'OFF'.
9
0C
Selected 'ON' and not able to be deselected.
9
0C
Selected 'ON' and not able to be deselected.
Press the COLD button 3 consecutive times to select
Press the COLD button 3 consecutive times to select
'ON'. Once selected 'ON' it cannot be deselected.
'ON'. Once selected 'ON' it cannot be deselected.
Press the WARM button once to advance
g
g
Press the WARM button once to advance
to next code.
to next code.
1. 00
MONEY COUNTER OPTION
1. 00
MONEY COUNTER OPTION
This option is either SELECTED 'ON' or NOT
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
SELECTED 'OFF'.
1.
00
Not Selected 'OFF'.
1.
00
Not Selected 'OFF'.
1.
0C
Selected 'ON'.
1.
0C
Selected 'ON'.
Press the COLD button 3 consecutive times to
Press the COLD button 3 consecutive times to
select 'ON' and 3 consecutive times to remove
select 'ON' and 3 consecutive times to remove
(Not Selected 'OFF'.) Counter resets by going
(Not Selected 'OFF'.) Counter resets by going
from 'OFF' to 'ON'.
from 'OFF' to 'ON'.
1
C0
Selected 'ON' and not able to be deselected.
1
C0
Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected,
To select 'ON' and not able to be deselected,
first select 'ON', then within 2 seconds, press
first select 'ON', then within 2 seconds, press
the COLD twice, HOT once, and exit the set-up
the COLD twice, HOT once, and exit the set-up
mode.
mode.
Press the WARM button once to advance
g
g
Press the WARM button once to advance
to next code.
to next code.
2. 00
This option is not available.
2. 00
This option is not available.
b. 40
VALUE OF COIN 1
b. 40
VALUE OF COIN 1
b. 05
This represents the value of coin 1 in number
of nickels: 05 = $0.25.
b. 05
With coin slide activation, this represents the total
vend price in nickels. Example: b.40 is equal to
By pressing the HOT button, there is an option
$2.00.
of 1–199 nickels.
g
Press the WARM button once to advance
With coin slide activation, this represents the total
to next code.
vend price in nickels. Example: b.40 is equal to
$2.00.
This represents the value of coin 1 in number
of nickels: 05 = $0.25.
g
Press the WARM button once to advance
to next code.
By pressing the HOT button, there is an option
of 1–199 nickels.
EXPLANATION
CODE
CODE
C. 20
VALUE OF COIN 2
VALUE OF COIN 2
C. 20
C.
20
This represents the value of coin 2 in number
C.
20
This represents the value of coin 2 in number
of nickels: 20 = $1.00.
of nickels: 20 = $1.00.
C.
05
By pressing the HOT button, there is the option
C.
05
By pressing the HOT button, there is the option
of 1–199 nickels.
of 1–199 nickels.
Press the WARM button once to advance
g
Press the WARM button once to advance
g
to next code.
to next code.
d. CS
COIN SLIDE OPTION
COIN SLIDE OPTION
d. CS
This option is either SELECTED 'ON' or NOT
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'. Press the COLD button 3
SELECTED 'OFF'. Press the COLD button 3
consecutive times to select/deselect this option.
consecutive times to select/deselect this option.
d.
CS
Selected 'ON'. (Default for 9050 models)
d.
CS
Selected 'ON'. (Default for 9050 models)
When coin slide mode is selected, set 'b'. equal to
When coin slide mode is selected, set 'b'. equal to
value of vend price in nickels. Set set-up code 6 xx
value of vend price in nickels. Set set-up code 6 xx
(regular cycle price) to number of slide operations.
(regular cycle price) to number of slide operations.
If the installer sets-up 'CS' and a coin drop
If the installer sets-up 'CS' and a coin drop
mechanism is installed, the washer will not
mechanism is installed, the washer will not
register coins that are inserted.
register coins that are inserted.
d.
00
Not Selected 'OFF'. (Default for 9060 models)
d.
00
Not Selected 'OFF'. (Default for 9060 models)
g
Press the WARM button once to advance
Press the WARM button once to advance
g
to next code.
to next code.
COIN/DEBIT OPTION
J. Cd
COIN/DEBIT OPTION
J. Cd
J.
Cd
Both coin and debit selected. Press the COLD
J.
Cd
Both coin and debit selected. Press the COLD
button 3 consecutive times for this selection.
button 3 consecutive times for this selection.
(Default for 9050 models)
(Default for 9050 models)
J.
C_
Coins selected, debit disabled. Press the COLD
J.
C_
Coins selected, debit disabled. Press the COLD
button 3 consecutive times for this selection.
button 3 consecutive times for this selection.
J.
_d
Debit card selected, coins disabled. Press the
J.
_d
Debit card selected, coins disabled. Press the
COLD button 3 consecutive times for this selection.
COLD button 3 consecutive times for this selection.
(Default for 9060 models)
(Default for 9060 models)
J.
Ed
Enhanced Debit is self-selected when a Generation
J.
Ed
Enhanced Debit is self-selected when a Generation
2 card reader is installed in the washer. The Ed
2 card reader is installed in the washer. The Ed
option cannot be manually selected or deselected.
option cannot be manually selected or deselected.
Press the WARM button once to advance
g
g
Press the WARM button once to advance
to next code.
to next code.
n. CE
CLEAR ESCROW OPTION
n. CE
CLEAR ESCROW OPTION
When selected, money held in escrow for
When selected, money held in escrow for
30 minutes without further escrow or cycle
30 minutes without further escrow or cycle
activity will be cleared.
activity will be cleared.
n
00
Not Selected 'OFF'.
n
00
Not Selected 'OFF'.
n
CE
Selected 'ON'. Press the COLD button once for this
n
CE
Selected 'ON'. Press the COLD button once for this
selection.
selection.
g
Press the WARM button once to advance
g
Press the WARM button once to advance
to next code.
to next code.
3-7
EXPLANATION
EXPLANATION
11
11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
