Starting Up From Otoaccess; Module Setup In Otoaccess - Interacoustics Eclipse Instructions For Use Manual

Eclipse Instructions for Use - US

2.8 Starting up from OtoAccess

Ensure that the Eclipse is switched on and connected before opening the software module. If the hardware is
not detected the selected Eclipse module can still be opened, but the test cannot start until the hardware is
detected.
To start from OtoAccess™:
1. Open OtoAccess™
2. Select the patient you want to work with by highlighting it blue
3. If the patient is not yet listed:
•
press the New client button
•
fill in at least the mandatory fields, marked with a red asterisk.
•
save the patient details by pressing the Save patient information button.
4. Select Instrument will show the modules you have for your Eclipse. EP 15 /25, ASSR, DPOAE and
TEOAE are modules related to the Eclipse. Double click on the wanted module to start the test.

2.8.1 Module Setup in OtoAccess™

If the software module icon does not appear in the Select Instrument box in OtoAccess™:
1. Go to File | Setup | Instruments tab
2. Create a new instrument, by:
a. Type in the Software module name in the New Instrument name field.
b. Select the relevant module from the Software modules dropdown menu.
c. Select Eclipse from the Hardware dropdown menu.
d. Select USB connection
e. Press Create.
f. Press Apply Settings.
g. Press OK to exit.
TM
Page 17