Restoring Factory Default Settings In The Software; Installing A Language Pack - Interacoustics Eclipse Instructions For Use Manual

Eclipse Instructions for Use - US
3. Accept to overwrite previously installed factory auto protocols.
Connect the Eclipse to your PC with the included USB cable following the safety requirements
outlined in the previous sections.

2.5.5 Restoring Factory Default Settings in the Software

Follow the software installation instructions using the relevant Eclipse module installation CD to restore
default factory protocols. You do not need to uninstall the software before doing this.

2.5.6 Installing a Language Pack

Following installation of the Eclipse software module, a language pack may be installed to change the
language from English to a different language.
Insert the installation CD and follow the on-screen steps to install the Eclipse module software. If the
installation procedure does not start automatically, click "Start", then go to "My Computer" and double click
the DVD/CD-RW drive to view the contents of the installation CD. Double click the "setup.exe" file to initiate
the installation.
The following languages are available on the Language Pack CD-ROM for each of the respective Eclipse
modules:
Page 14