Temporary Setup; Reporting; Printing; Save & Exit - Interacoustics Eclipse Instructions For Use Manual

Eclipse Instructions for Use - US

6.6.3 Temporary Setup

The Temporary Setup icon allows temporary changes to be made the selected protocol. Changes will only
apply to the current test session. Modified protocols will display an asterisk (*) next to the protocol name.

6.6.4 Reporting

The Report icon opens the report editor for selecting a pre-written report template, or for editing or writing a
new report for the selected session.

6.6.5 Printing

The Print icon prints the report for the selected session. The number of printed pages and the content may
vary according to selection in the Print wizard setup.
6.6.6 Save & Exit
The Save & Exit icon saves the current test session and closes down the software.
If no data was recorded, a session will not be saved.
To exit without saving, click on the red 'X' in the upper right hand corner of the screen.
This icon is not available through Noah 4. When clicking on Exit from the File menu or exiting via the close
button in the upper right hand corner of the screen, a prompt to save the session is displayed.

6.6.7 Viewing Historic Sessions

Select a historic session from the session list. Alternatively, use the PgUp and PgDn keys on the keyboard
to toggle through historic sessions.

6.6.8 Stimulus Window

The Stimulus window displays the frequencies for testing and the stimulus
intensities running and/or waiting.
Page 81